A good oil bath when the wood starts to appear dry. If the UFO is not well oiled and gets wet, the wood may warp. If there is flour in the engravings, you can use a stiff bristle nylon brush, like an old toothbrush or our fine brass wire brush, dip the brush in the oil and work out the flour while working in the oil. We suggest using our food grade fractionated coconut oil, as it is not petroleum based, but any oil that will not go rancid is fine. Give the UFO a good soak, overnight is fine. It will darken and look beautiful! Make sure to wipe off any excess oil once the UFO has been fully soaked, and do not wash with water, as it will result in the wood warping.

If the blade is out, the first thing to do is use masking tape or the thickest tape you have and wrap up the blade so you can apply a bit of force without the possibility of cutting yourself. Then place the UFO between the palms of your hands and push in firmly while twisting counter-clockwise. If you use some strength, this will usually do the trick. If the blade is not sticking out, I recommend soaking the UFO with a food grade mineral and letting it soak in for 5-10 minutes. Then re-attempt opening. Last but not least, try putting your UFO in the fridge or freezer for a bit! If none of these strategies work, please contact us to help resolve the issue!

The number one cause of a stuck UFO is over-tightening. It should not require much force to prevent the blade from slipping. I recommend mounting the blade with the screw through the middle slot in the blade. This ensures safety and makes it easy to achieve a secure blade. If you'd like to mount the blade off of the screw for more extension of the edge, I suggest either the Corbeau of Nux models as they are stiffer than the other UFO models. Also, keep your UFO well oiled. Any oil that will not go rancid is fine. I soak them overnight in food grade mineral oil before shipping, but the paper wrap inside wicks much of the oil away. I highly recommend a good oil bath to preserve the wood, prevent warping and prevent the UFO from sticking. Wipe off your blade before installing it in your UFO. The Astra blades come with a slightly gummy residue on them-to keep them enclosed in their wrapping. Just wipe it off with a damp towel and you're ready to go! Try to avoid closing your UFO if there is flour residue in between the two halves, this can turn into a kind of glue, and can result in a stuck UFO as well.

We do ship internationally, but please check our list of Resellers before ordering directly from us. CLICK HERE to see the Resellers page for links to our retailers around the globe. If there is a reseller in your country, it will be cheaper for you to order from them!

If you’re looking to return or exchange your order for whatever reason, we’re here to help! We offer free returns within 14 days of purchase. You can return your product for store credit, a different product, or a refund to the original payment method.

To initiate a return, please email returns@wiremonkey.com to start the process.

Additional Information:
We'll issue a refund same day back to the original method of payment.
We may or may not require you to return the product, but we'll pay for shipping if we need it back, by sending a pre-paid return label.